RECIPE
Step One: Paint the surface with two coats of acrylic
paint tinted to Pratt and Lambert 2133 Puffball.
Step Two: Apply spray adhesive to the back of the
Damask Stencil and position it on the surface.
Step Three: Mix three parts glaze with one part acrylic
paint tinted to Pratt and Lambert 2043 Platinum.
Step Four: Using a drybrush technique, fill the openings
in the stencil with a stiff brush. The stencil used in this
example was Ralph Lauren Damask.
Step Five: Remove stencil, reposition, and repeat.
Step Six: Using a dry rag, rub the surface in a circular
motion with the same glaze mixture. If desired, use fine sandpaper
to distress lightly.
|
